Denon DN-700AVP - Page 5

5
Display
1. Decoder Indicators: This illuminates when the respective decoders are operating.
2. Input Signal Indicators: This illuminates when an input signal is detected.
3. Information Display: The input source name, surround mode, setting values, and other information is shown
here.
4. Speaker Indicator: This illuminates when the surround channel speaker is in use.
5. Zone 2 Indicator: This illuminates when Zone 2 is powered on.
6. Master Volume Indicator: This illuminates when the master volume is adjusted.
7. Input Mode Indicators: Sets the audio input modes for the different input sources.
8. HDMI Indicator: This illuminates when playing a source using a HDMI connection.
1
1
2
3
4
5
6
7
8