44
Automatic Status Information Codes
In the event that a change is made to DN-700R from the device itself, DN-700R may automatically send
status information to the host. See below for the status information codes that can be automatically
sent to the host.
Automatic Status Information
(Host → DN-700R)
CATEGORY CONTENTS CODE DESCRIPTION
Media Selection
USB @0MEUS\r
The USB drive was selected as the current media
source
SD1 @0MES1\r
SD Card 1 was selected as the current media
source
SD2 @0MES2\r
SD Card 2 was selected as the current media
source
Network @0MENE\r
The network was selected as the current media
source
Media Status
SD Card In @0CDCI\r An SD card was inserted into one of the SD slots
SD Card Out @0CDNC\r The SD card was ejected
SD Card Error @0CDCE\r There was an error with the SD card
Unformatted SD Card @0CDUF\r
An unformatted SD card was inserted into one of
the SD slots
Write Protected SD
Card
@0CDWP\r
A write protected SD card was inserted into one of
the SD slots
SD Card Door Opened @0CDDO\r The SD slot door was opened
Device Status
Recording @0STRE\r A recording was started
Recording Paused @0STRP\r The current recording was paused
DIR Unlocked @0STRU\r
With the recording audio source set to one of the
digital inputs, the digital interface receiver was
unlocked
Playing @0STPL\r Playback of the current track was initiated
Paused @0STPP\r The current track was paused
Repeat Paused @0STPR\r
The current track was paused (and the repeat
feature is activated)
Rewinding @0STRW\r The current track is being rewound
Fast Forwarding @0STFF\r The current track is being fast forwarded
Stopped @0STST\r The current tracklist was stopped
Cued @0STCU\r A track was cued
Autocueing @0STAC\r A track was autocued
Timer Standby @0STSH\r
Pre-scheduled recording or playback was
automatically initiated
Loading @0STLD\r DN-700R is currently loading
Busy @0STBY\r DN-700R is currently busy
File List Opening @0STFL\r The file list was opened
To Next Page
Loading...
Need help?
General
