APPENDIX
Appendix shows the list of commands that control this unit externally through a host device.
Normally, it is dealers such as installers that use the list of commands to make settings, so this section is only in English.
n D&M RC Communication format
Control Command List
Description Command Remarks
KEY Standby @02312'\r'
Control PowerON @023PW'\r'
STOP @02354'\r'
PLAY @02353'\r'
PLAY PAUSE @02348'\r'
SKIP BACK @023SB'\r'
CUE @023CU'\r'
Frame ON @0frON'\r'
FWD @0fr00'\r'
RWD @0fr01'\r'
FF ON @02352'\r' FRAME FWD while the FRAME ON.
FWD while STOP, PLAY and PLAY PAUSE
When this command is received in FWD, Speed gose up by one step.
Speed X @02352X'\r' FWD Speed X
X=1:x2,X=2:10,X=3:50,X=4:x100,X=5:x200
RWD ON @02350'\r' FRAME RWD while the FRAME ON.
RWD while STOP,PLAY and PLAY PAUSE
When this command is received in RWD, Speed gose up by one step.
Speed X @02350X'\r' RWD Spead X
X=1:x2,X=2:10,X=3:50,X=4:x100,X=5:x200
Track Jump nnnn @0Trnnnn'\r' nnnn:Track No (4 digits)
nnn @0TRnnn'\r' nnn:Track No (3 digits)
Track Jump >>I @02332'\r'
Track Jump I<< @02333'\r'
REC @02355'\r'
REC PAUSE @023Rp'\r'
Rec Monitor ON @023RM00'\r'
OFF @023RM01'\r'
Timer Record Off @023TO'\r'
M.Track @023MT'\r' When recording, the file is divided at the position in which the button was
pushed. One addition to Track No.
Mark @023121'\r'
Mark FWD @023M+'\r' It jumps to the mark of forward.
Mark RWD @023M-'\r' It jumps to the mark of reverse.
Appendix
To Next Page
