Denon DN-S5000 User Manual

14
ENGLISH
• The Alpha-Track can be played with a delay of the specified beat or time after the Main Track.
Mirror Mix
4
5
Start Mirror Mix playback
r When the 13 button is
pressed while the Main
Track is paused or in the
standby mode, Mirror
Mixing starts.
• When the a
13 button is pressed while
the Main Track is playing, Mirror Mixing
resumes.
Pause Mirror Mix playback
t When the
13 button is
pressed during Mirror
Mixing, Mirror Mixing
pauses.
• The
13 button flashes.
When the a 13 button is pressed during
Mirror Mixing, playback of the Alpha-Track
only pauses.
• The a
13 button flashes.
6
Cancel Mirror Mix mode
y The Mirror Mixing mode is
turned off when the
MIRROR MIX button is
pressed and held in for
more than 1 second.
• The disc can be ejected while still Alpha-Track playing.
Alpha Track Hot Disc
1
2
Data loading
When the !0 DISC EJECT button
is pressed and held in for more
than 1 second while the Alpha-
Track is playing, playback
continues and the subsequent
data is read for a maximum of 35
seconds. (at 0% pitch)
• If a Seamless Loop of within 35 seconds is
playing, loop playback continues.
NOTE:The Hot Disc function cannot be used
when both the Main Track and Alpha-
Track are playing.
When the Hot Disc function is started,
the Sampler data and points A and B
aside from the points for the currently
playing loop are cleared.
Eject
Once data loading is completed, the disc is
ejected.
3
4
Disc loading and Cue search
Load a new disc.
• Operate as usual, and cue to the beginning
of a track or match the beat.
• When at this time the Alpha-Track signals
are being output from the MAIN OUT
terminals, the disc’s playback signals are
output from the ALPHA OUT terminals, and
when the Alpha-Track signals are being
output from the ALPHA OUT terminals, the
disc’s playback signals are output from the
MAIN OUT terminals.
• The a MODE button flashes when the disc’s
playback signals are being output from the
ALPHA OUT terminals.
Change output
Once cueing is completed, stop
playback, and when the #2 a
MODE button is pressed while
it is flashing, output of the
disc’s playback signals switches
from the MONITOR OUT to the
MAIN OUT terminals.
• Start playback from the disc and stop Hot
Disc playback.
MIRROR MIX
5
Hot Disc clear
When the #3 a CUE button is pressed while
pressing the #6 a PITCH BEND – button, the
Hot Disc mode is turned off and the player is
set back to the normal mode.
NOTE:The a MODE button does not function
before the Hot Disc data is cleared.
MIRROR MIX
HOT DISC
PITCH BEND
SAMP. STOP
3
Set the Mirror Mix parameter
e When the MIRROR MIX
button is pressed again
(short press), the delay beat
time can be set with the
PARAMETERS knob.
• When the Mirror Mix mode is set during
playback, Alpha-Track playback is
paused.
MIRROR MIX
r, t
w, e, y
q
1
2
Set BPM
q The BPM for Main Track
playback can be set with
either the AUTO BPM
counter, TAP button or
BPM INPUT button.
Enter Mirror Mix mode
w The Mirror Mix mode is set
when the MIRROR MIX
button is pressed and held
in for more than 1 second.
AUTO / INPUT BPM
LOCK
MIRROR MIX

Denon DN-S5000 Specifications

General

Brand	Denon
Model	DN-S5000
Category	CD Player
Language	English