Denon DNP-2000NE - Page 18

17
r Select the “DNP-2000NE” format.
• It is normally recommended to set the format to “2 ch 32-bit
Integer 384.0 kHz”.
DNP-2000NE
DNP-2000NE
r
t Quit Audio MIDI Setup.
DNP-2000NE
DNP-2000NE
e
System requirements: macOS 12 or 13
q Move the cursor to “Go” on the computer screen, and
then click “Utilities”.
• The utility list is displayed.
w Double-click “Audio MIDI Setup”.
• The “Audio Devices” window is displayed.
e Secondary click on “DNP-2000NE”, and then check that
“Use This Device For Sound Output” is checked.
• If a different device is checked, select and secondary click on
“DNP-2000NE”, and then select “Use This Device For Sound
Output”.
macOS
1. DNP-2000NEE2_QSG_ENG_00A_230217.indd 171. DNP-2000NEE2_QSG_ENG_00A_230217.indd 17 2023/02/17 13:15:552023/02/17 13:15:55