Denon DP-500M - PWB and Motor Assembly Removal

4
4
DP-500M
3. MAIN P.W.B. ASS'Y , TONE ARM ASS'Y
(1) Remove 4 screws ①
fastening the main P.W.B Ass’y.
(2) Unsolder 5 wires and GND wire from arm section on the output P.W.B. Ass’y.
(3) Remove 3 screws ② secured the tone arm.( Hold tone arm during removing.)
4. D.D. MOTOR ASS'Y, TRANSFORMER
(1) Remove 5 screws ③
secured the D.D.motor Ass’y.
(2) Unsolder GND wire from output P.W.B. Ass’y on the D.D.motor Ass’y.
(3) Put cabinet reversely.
(4) Remove 4 screws ④ secured D.D.motor Ass’y. ( Hold D.D.motor Ass' y during removing.)
(5) While holding 4 nuts ⑤ , remove 4 screws ⑥ secured transformer.
1
2
CN
9
0
1
3
4
6
5