Do you have a question about the Denon DRA-775RD and is the answer not in the manual?
rated output | 90W + 90W (8 ohms, 20 Hz - 20 kHz, THD 0.05 %) |
---|---|
total harmonic distortion | 0.009%(-3dB at rated output, 8 ohms) |
power bandwidth | 5 Hz - 40 kHz (8 ohms, THD 0.15%) |
input sensitivity/impedance PHONO (MM) | 2.5 mV/47 kohms |
---|---|
input sensitivity/impedance CD, TAPE, VDP, VCR, V-AUX | 150 mV/ 47 kohms |
max input level PHONO MM | 150 mV/1 kHz |
input terminal VDP, VCR, V-AUX | 1 Vp-p / 75 ohms |
---|---|
output terminal VCR, MONITOR, MULTI SOURCE | 1 Vp-p / 75 ohms |
tuning frequency range | 87.5 - 107.9 MHz |
---|---|
usable sensitivity | 0.9 µV (10.3 dBf) |
S/N 50 dB sensitivity Mono | 1.6 µV (15.3 dBf) |
power supply | AC 120 V, 60 Hz, 3.4 A |
---|---|
dimensions | 434 (W) x 161 (H) x 416 (D) mm |
weight | 11.5 kg |
High-speed, high-power transistors ensure a very hefty, clean power output.
Incorporates original circuit and high-capacity transformer to suppress dynamic IM distortion.
Responds to sudden dips in speaker impedance for stable drive under all load conditions.
Short signal path, separate heat sinks for channels, and close power supply placement.
Features RDS station search, PTY, TP, and Radio Text Message capabilities.
Offers random preset/recall of 40 stations and auto preset memory for FM stations.
Uses microprocessors and varactor diodes for accurate station frequency input.
Integrates audio and video sources with VDP, VCR, and Video Aux terminals.
Allows independent selection of desired video sources on audio sources.
Permits FM/TV simulcast recording or combining CD sound with video disc picture.
Enables selecting different sources for main and second rooms simultaneously.
Supports independent operation from a second room with optional accessories.
Commands receiver and main functions of DENON CD player/cassette deck.
Operates Multi Source Output and receiver functions from a second room.
Details rated output, harmonic distortion, power bandwidth, and frequency response.
Covers input sensitivity, max input level, RIAA deviation, and tone/loudness controls.
Details input and output terminal specifications for video signals.
Includes tuning range, usable sensitivity, S/N, THD, capture ratio, and selectivity.
Provides tuning range, usable sensitivity, and signal-to-noise ratio for AM.
Lists power supply, power consumption, dimensions, and weight.