To Next PageTo Next Page
Need help?Do you have a question about the Denon DRA-275R and is the answer not in the manual?
General| Input Sensitivity | 2.5mV (MM), 150mV (line) |
|---|---|
| Tuning range | FM, MW |
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion (THD) | 0.08% |
| Speaker load impedance | 8 ohms |
| Tuner Section | FM Stereo, MW |
Circuits handling low-level/high-level signals divided into blocks to minimize influence, resulting in cleaner output and greater fidelity.
Powerful high-speed transistors deliver hefty, stable power output reflecting DENON's advanced amplifier technology.
Provides video input/output terminals for connecting VCRs or TV monitors, including two sets for VCR and monitor.
Variable Loudness control allows selection of the most appropriate loudness setting at any volume.
Advanced electronic switches near input terminals reduce sound quality deterioration by eliminating long cables.
Receiver automatically memorizes settings upon power-off, preserving the condition for the next power-on.
Terminals accommodate banana plugs, spade plugs, or bare wire wrapping for speaker connections.
Enables selection between two sets of connected speakers for playback.
Provides convenient AC outlets for powering other audio components.
FM broadcasting system providing services like station name (PS), program type (PTY), and traffic info (TP/TA).
Displays the name of the station being received on an 8-character display.
Allows selection of music/program types (e.g., Rock, News) for automatic tuning.
Displays up to 64 characters of text transmitted by the station.
Automatically tunes to stations broadcasting traffic information.
Indicates if the station provides traffic information, enhancing awareness.
Displays current time and allows easy adjustments for daylight saving.
Stores up to 40 FM/AM stations in random order across five groups (A-E).
Automatically stores up to 40 FM stations into memory when frequencies are unknown.
Allows entering up to 8 characters for each preset station for easier identification.
Fluorescent display clearly shows reception frequency and preset channel number.
TUNED indicator lights up when a station is tuned; manual tuning is also precise.
Operates DENON CD players/cassette decks with the same remote unit as the receiver.
Automatically scans for stations and tunes to the next available signal.
Allows for rapid manual adjustment of tuning frequencies.
Enables precise manual tuning in small increments for accurate station selection.
Remembers the last tuned channel for quick recall upon power-on.
Details rated output, harmonic distortion, power bandwidth, frequency response, and output impedance.
Covers input sensitivity/impedance, max input level, RIAA deviation, S/N ratio, tone, and loudness controls.
Details input and output terminals for video signals, including VCR and monitor connections.
Specifies tuning range, usable sensitivity, S/N ratio, THD, capture ratio, AM suppression, image rejection, and frequency response.
Specifies tuning range, usable sensitivity, and signal-to-noise ratio for AM reception.
Includes power supply, power consumption, dimensions, and weight.
