The First Name
In Digital Audio
4
DRA-375RD
Power Amplifier Section
Rated output 60W + 60W
(8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
Total harmonic distortion 0.03% (-3dB at rated output, 8 ohms)
Power bandwidth 10 Hz - 40 kHz (8 ohms, THD 0.15%)
Frequency response 20 Hz - 50 kHz ± 1.5 dB (at 1W)
Output impedance 0.1ohm (1 kHz)
Preamplifier Section
Input sensitivity/ Impedance PHONO (MM) : 2.5 mV/47 kohms
CD, VIDEO. TAPE 1, TAPE 2 / VCR :
150 mV/ 47 kohms
Max. input level.. PHONO MM 180 mV/1 kHz
RIAA deviation 20 Hz - 20 kHz ± 0.5 dB
Signal-to-noise ratio (A-weighted) PHONO MM 78 dB (at 5mV input)
CD, VIDEO, TAPE 1, TAPE 2 / VCR : 95 dB
Tone control Bass 100 Hz ± 10 dB
Treble 10 kHz ± 10 dB
Loudness control 50 Hz : + 10 dB, 10 kHz : + 5 dB
(at VARIABLE LOUDNESS “ max ” position)
Video Section
Input Terminal VIDEO, VCR : 1 Vp-p / 75 ohms
Output terminal VCR, MONITOR : 1 Vp-p / 75 ohms
FM Section
Tuning frequency range 87.5 - 108 MHz
Usable sensitivity 0.9 µV (10.3 dBf)
S/N 50 dB sensitivity (µV at 75 ohms) Mono : 1.6 µV (15.3 dBf)
Stereo : 23 µV (38.5 dBf)
Signal-to-noise ratio (A-weighting) Mono : 82 dB, Stereo : 78 dB
Total harmonic distortion Mono : 0.1%, Stereo: 0.15%
Capture ratio 1.5 dB
AM suppression 50 dB
Image rejection 42 dB
Effective selectivity 55 dB (± 400 kHz)
Frequency response 30 Hz - 15 kHz, +0.2, -1.5 dB
Stereo separation 40 dB (1 kHz)
AM Section
Tuning frequency range 520 - 1710 kHz
Usable sensitivity 18 µV
Signal-to-noise ratio 55 dB
General
Power supply, Power consumption AC 120 V, 60 Hz, 2.6 A
Dimensions, Weight 434 (W) x 130 (H) x 312 (D) mm, 6.8 kg
17.1”(W) x 5.1” (H) x 12.3” (D), 15.0 lbs.
Specifications
DRA-375RD
To Next Page
Loading...
