14
8.3) Use ui to select “Network”, then
press ENTER.
8.4) Use ui to select “Connection”,
then press ENTER.
Connection
• “Connection” can’t be selected while network module is setting up.
Please wait for the completion of this setting up. This might take up to 1
minute.
8.5) Select “Connect: Wi-Fi”.
Connect:Wi-Fi
• If “Connect: Wired” is displayed, press ENTER, use o p to select
“Wi-Fi” and press ENTER.
8.6) Use ui to select “Wi-Fi Setup”,
then press ENTER.
Wi-Fi
Setup
1. DRA-800HE2_QSG_ENG_00A_190411.indd 14 2019/04/19 9:35:17
To Next Page
Loading...
