20
9.4) Press ENTER, then use o p to set
the Network Control setting, after
that press ENTER again.
Set “NetCtrl” (Network Control) to “O” to reduce
the power consumption during standby. You can
not turn on your receiver from your smartphone or
use Bluetooth/Apple AirPlay/HEOS App/Amazon
Alexa until your receiver is powered on manually and
connects to your network.
Set “NetCtrl” (Network Control) to “Always” to
control your receiver from your smartphone, use
Bluetooth/Apple AirPlay/HEOS App/Amazon Alexa
voice service and maintain constant network access.
Power consumption during standby power will be
slightly higher.
9.5) Press SETUP to exit the setup
menu.
1. DRA-800HE2_QSG_ENG_00A_190411.indd 20 2019/04/19 9:35:20
To Next Page
Loading...
