Denon DRM-600 - Page 5

® DISPLAY
The indicators with an encircled number light up by
pressing the corresponding button.
+ LINEAR TAPE COUNTER
- MEMORY indicator 6
fj
-20 -t2
Tape-passage is indicated digitally in minutes and seconds.
oak Coe oe oe oe ee eee Fee ae aa
R GoooopoboDoDoDoeoOooooooo
- TAPE TRANSPORT indicator @)
: FLUORESCENT PEAK METER
These meters indicate recording or playback peak
levels for each channel.
44 +6 +10
- TAPE TYPE indicator
Displays the cassette type setting selected by the
Auto Tape Select feature.
- FILTER indicator @
- DOLBY NR indicator @
{The MUSIC SEARCH mode is indicated by Hashing
of the “p" indicator, and the REC MUTE mode
by flashing of the’ “§#" indicator.)
CASSETTE TAPE
@ Handling Precautions
C120 cassettes
C120 cassettes are not recommended as they use a very
thin tape base which may become tangled around the
capstan or pinchroller..
e Tape slack
Before putting a tape into the deck, take up any slack
with a pencil or your finger tip. This precaution is also
to prevent the tape from becoming entangled around the
capstan or pinchroller.
AUTO TAPE SELECT FEATURE
This Stereo Cassette Deck contains an Auto Tape Select
feature which automatically selects the optimum bias and
equalization for the tape in use. This is accomplished by
detection of tape type detection holes in the cassette
housing.
Storage Precautions
eDo not store cassette tapes in a place where they will
be subject to:
* Extremely high temperature or excessive moisture
- Excessive dust ¢ Direct sunlight
* Magnetic fields (near TV set or speakers)
¢ To eliminate tape slack, store your cassettes in cassette
cases with hub stops.
@ Accidental Erasure Prevention
eEvery cassette has erasure prevention tabs for each side.
To protect your valuable recorded tapes from accidental
or inadvertent erasure, remove the tab for the appropriate
side with a screwdriver or other tools.
@To record on a tape with the erasure prevention tabs
removed, cover the tab holes with plastic tape.
Erasure prevention
tab for side A
Erasure prevention
tab for side B
elf a tape without tape type detection holes is used,
the TAPE SELECT indicator will not indicate the
correct tape type and the deck will automatically
adjust itself for normal tapes,
Detection holes
for chrome tape