Denon DRW-585 - Product Overview; Welcome and Introduction; Package Contents Checklist

ENGLISH
Thank you very much for purchasing the DENON component stereo
cassette tape deck,
DENON proudly presents this advanced tape deck to audiophiles and
music lovers as a further proof of DENON's non-compromising pursuit of
the ultimate in sound quality. The high quality performance and easy
operation are certain to provide you with many hours of outstanding
listening pleasure.
— TABLE OF CONTENTS —
FEATURES. 5
CONNECTION. 5
NAMES AND FUNCTION OF PARTS. 6, 7
CASSETTE TAPES. 7
AUTOMATIC TAPE SELECTION . 8
PLAYBACK. 8
RELAY PLAY. 9
MUSIC SEARCH SYSTEM . 9
RECORDING . 10
PROPER RECORDING LEVEL. 11
RECORDING BIAS ADJUSTMENT. 11
REC/REC MUTE AND REC PAUSE BUTTON. 11
DIMMER ADJUSTMENT. 11
DUBBING .. 12
SYNCHRONIZED RECORDING FUNCTION . 12.13
TAPE COUNTER AND MEMORY STOP. 13
TIMER RECORDING/PLAYBACK. 14
DOLBY B AND C NOISE REDUCTION SYSTEM. 14
DOLBY HX-PRO HEADROOM EXTENSION SYSTEM . 15
MAINTENANCE. 15
TROUBLESHOOTING. 16
SPECIFICATIONS . 16
Please check to make sure the following items are included with the main
unit in the carton:
(1) Operating Instructions. 1
(2) Connection Cords . 2
(3) Mini-Plug Cable. 1
FEATURES_
■ Computer Controlled Mechanism
■ Dual Power Supply
■ Dolby HX-Pro Headroom Extension System
■ Dolby B & C Noise Reduction Systems
■ Manual Bias Adjustment Control
■ Dual Computing Tape Counter with 4-Digit Readout and Memory Stop
■ Music Search System
■ FL Peak Level Meters
■ Auto Tape Selector
■ 2-Speed Dubbing
■ Relay Playback
■ Synchronized Recording
■ Timer Play and Timer Recording
■ Optional Remote Controllable
■ Tape Lighting
CONNECTION_
• Leave your entire system (including this cassette deck) turned off until all connections between the deck and other components have been completed.
Receiver or amplifier DRW-585
■ Connecting the Deck to an Amplifier
• Before connecting the deck to your amplifier, please review your
amplifier's instruction manual.
• Use the white plugs for the left channel and red plugs for the right
channel.
■ Tape Dubbing
• Many stereo amplifiers and receivers have tape dubbing circuitry so
that tape duplication can be performed between two or more tape
decks. Review your amplifier's instruction manual for a full
explanation of this mode of operation.
■ Connecting Headphones
To listen through headphones, plug your headphones into the PHONES
jack.
■ Installation Precautions
If the deck is placed near an amplifier, TV or tuner, noise (induced hum)
or beat interference may result, especially during FM or AM reception.
If this occurs, place the deck further away from other components or
reorient its position.
— Caution-
A mechanical sound is heard the first time the power switch is set to
"ON" after the power cord is plugged into an outlet. This is the
sound of the cassette mechanism being set to the proper operating
state, and is normal.
(When using an AC outlet on a receiver or amplifier, used an
"UNSWITCHED" outlet.)
5