Denon DSD300 User Manual

19
5. Battery Info. mode
"
-
" : "Cycle Count"→"TTL CHG"→"Runtime"ested during production to perform the following settings automatically.
"
+
" : "Cycle Count"→"Runtime"→"TTL CHG"
Startup display
"Battery Info." displayed for 5 seconds.
Number of charging cycles
To show "Cycle Count: xxxx"
Total charge time
To show "TTL CHG: xxxxxH"
Total run time in battery mode
To show "Runtime: xxxxxH"
How to release
Go to standby mode (Not erase status data)
How to clear counters
(You should clear counters when replace the battery ASSY.)
- Press the Play/Pause button for 5 seconds at Battery info mode.
- To show "Cycle Count: 0", after erasing data.
Battery Info.
Cycle Count: 12345
H: hours
TTL CHG: xxxxxH
H: hours
Runtime: xxxxxH
Clear
To show "Clear" in 2 seconds
Cycle Count: 0
Return to Battery info.

Denon DSD300 Specifications

General

Brand	Denon
Model	DSD300
Category	Docking Station
Language	English