What to do if my Denon CD Player can't play a disc?
If your Denon CD Player can’t play a disc, try cleaning the disc first. Make sure the disc label is facing up. Test with another disc to see if the original disc is defective. Also, check and cancel the ratings control or change the control level if necessary. Ensure that you are inserting a disc that is compatible with the player.
How to fix no image from HDMI connection on Denon CD Player?
If you have no image from the HDMI connection on your Denon CD Player, first check the HDMI connection itself. Verify that your connected monitor or equipment supports HDCP, as the player requires this to output a video signal. Try connecting the DVD player to the display equipment using the Audio/Video cables and check the HDMI settings. Ensure the output format of the player (HDMI FORMAT) matches the supported input format of your connected equipment. Finally, check if PURE DIRECT is set to “ON” and, if so, set it to “OFF.”
Why is there no sound or distorted sound from my Denon CD Player?
If you're getting no sound or distorted sound from your Denon CD Player, start by adjusting the volume and checking that the speakers are connected correctly. Note that HDMI sound is not output during PURE DIRECT or when AUDIO MODE is set to “ANALOG.”
Why does my Denon DVD-1920 DVD Player have no sound or distorted sound?
If you're experiencing no sound or distorted sound with your Denon DVD Player, first adjust the volume. Then, check that the speakers are connected correctly. Note that HDMI sound is not output during PURE DIRECT or when AUDIO MODE is set to ANALOG.
What to do if my Denon CD Player has no sound or picture?
If you're experiencing no sound or picture with your Denon CD Player, verify that your TV is turned on and check the video and HDMI connections. Also, check the AUDIO/VIDEO cable connections to the TV. If using HDMI, and progressive signals are not output from the COMPONENT VIDEO OUT jacks, press the HDMI button on the front panel to set the HDMI output mode to OFF. Ensure that PURE DIRECT is set to “OFF,” and confirm that the VIDEO OUT mode is set correctly.
Audio Outputs| analog output | 1 set (L/R) |
|---|---|
| multi channel output | 1 set (Front L/R, Center, Surround L/R, Subwoofer) |
| optical digital output | 1 |
| coaxial digital output | 1 |
| HDMI output | 1 |
CD Audio Specifications| frequency response | 4 Hz - 20 kHz |
|---|---|
| signal-to-noise ratio | 115 dB |
| dynamic range | 98 dB |
| total harmonic distortion | 0.004% |
Video Outputs| composite video output | 1.0 Vp-p (with 75 ohms load) |
|---|---|
| S-Video output Y | 1.0 Vp-p (with 75 ohms load) |
| S-Video output C | 0.286 Vp-p |
| component video output Y | 1.0 Vp-p (with 75 ohms load) |
| component video output Pb/Cb | 0.648 Vp-p (with 75 ohms load) |
| component video output Pr/Cr | 0.648 Vp-p (with 75 ohms load) |
| HDMI output version | 1.1 |
General Specifications| power supply | AC 120 V, 60 Hz |
|---|---|
| power consumption | 20 W |
| standby power consumption | 1 W |
| dimensions (W x H x D) | 435 x 75 x 310 mm |
| dimensions (W x H x D) inches | 17-3/32 x 2-61/64 x 12-13/32 inches |
| weight | 2.6 kg |
| weight in pounds | 5.72 lbs |
To Next Page
