12
SD Card Mode
To access an inserted SD card:
1. Press and release the Mode button until the SD card icon appears on the screen.
Note: When you connect a USB device, SD card, or Bluetooth device, Envoi Go will automatically
switch to the most recently connected source.
2. In SD Card mode, press and hold the Mode button for 2 seconds to see additional menu options.
3. Use the |<< and >>| buttons to scroll through and press Play/Pause to select one of the settings seen
below.
EQ: Envoi Go provides 7 optional equalizer presets to enhance music. You may select from these EQ
settings:
Note: The digital EQ presets can only be applied to Bluetooth, SD, and USB sources.
• Normal (Nor)
• Pop
• Rock
• Jazz
• Classic (Clas)
• Country (Cou)
• Low Bass (Bas)
Play Mode:
• All (A): Plays through and repeats all of the tracks on the SD card.
• Repeat One (1): Plays and repeats the current track.
• Repeat Folder (F): Plays through the tracks in the current folder and then restarts playback of the
tracks.
• Normal (N): Plays through the tracks on the SD card.
• Random (R): Selects a random track to play.
• Browse (I): Plays the first 10 seconds of each track on the SD card.
Change Device: Allows you to change from listening to the SD card or to a connected USB drive.
Exit: Leaves the SD Card Mode menu.
Card Folder (seen in the menu when the SD card track is paused): Select a track from a folder on the SD
card. Use the |<< and >>| buttons to navigate up or down and press Play/Pause
to open a folder or select a
track to play.
Delete File (seen in the menu when the SD card track is paused): Deletes the currently selected track.
Delete All (seen in the menu when the SD card track is paused): Deletes all tracks on the SD card.
Exit: Leaves the Music options menu.
To Next Page
Loading...
Need help?
General
