Adjusting the Equalizer
1
Select “EQ”.
2
Adjust the Treble or Bass up or down.
Select the Reset button to restore the default settings.
Adjusting the Balance
1
Select “Balance”.
2
Adjust the Balance to the left or right.
Adjusting the Audio Quality
Selects the transcoding option for rebroadcasting audio from one HEOS
device to another HEOS device (or group of devices) across the network.
When set to “Normal”, high bit rate audio sources originating from the first
device (such as AUX input, WAV, FLAC and PCM) will be transcoded to
ensure the highest level of reliability for the audio stream.
1
Select “Quality”.
2
Select Normal (default) or High.
If you have selected High and you experience audio dropouts when streaming
sources from one device to other devices, please select Normal (default).
Contents Setup Use Troubleshooting Status LED Appendix
37
To Next Page
Loading...
