Adjusting the Volume Limit
You can set the maximum volume of the HEOS amplifiers to prevent
sudden loud volume.
1
Select “Volume Limit”.
2
Select the maximum volume percentage (95, 90, 85,
80).
NOTE
0
Depending on the speakers that are connected, the protection circuit may activate
and the power may be turned off when music is played at a high volume. (The
Status indicator flashes in red.) If this happens, configure the “Volume Limit”
setting.
Adjusting the Status Light Brightness
1
Select “Status Light”.
2
Adjust the brightness up or down or set the slider to
the OFF position to completely disable the status light.
Contents Setup Use Troubleshooting Status LED Appendix
38
To Next Page
Loading...
