Simple operations in the power off state
0
When an input source select button or the 1/3 button, FAVORITES CALL button or 5 button on the remote control is pressed, the operation is
performed at the same time as the unit switches on.
0
When the “Network Control” function is set to “On”, you can perform playback, or other operations through AirPlay or HEOS App. (v p. 106)
I want the volume not to become too loud by mistake
0
Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake.
(v p. 93)
I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new
one
0
Set “General” - “Speaker Configuration” in the settings menu to “Response”. (v p. 95)
Contents Connections Playback Settings Tips Appendix
116
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
