To Next PageTo Next Page
Need help?Do you have a question about the Denon AVR-3803 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Dolby Digital | Yes |
| DTS | Yes |
| Component Video Inputs | 3 |
| S-Video Inputs | 7 |
| Digital Audio Inputs | 5 (3 Optical, 2 Coaxial) |
| Analog Audio Inputs | 9 |
| Type | AV Receiver |
| THD | 0.05% |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | 100 dB |
| Frequency Response | 10 Hz - 100 kHz |
| Digital Inputs | 5 (3 Optical, 2 Coaxial) |
| Weight | 33.1 lbs |
| Amplifier Channels | 7 |
| Signal-to-Noise Ratio | 100 dB |
| Surround Sound Modes | Dolby Digital, DTS, Dolby Pro Logic II |
| Power Output | 110W per channel (8 ohms, 20Hz-20kHz, 0.05% THD) |
| Video Inputs | S-Video, Component |
| Input Sensitivity/Impedance | 200 mV / 47 kOhm |
| Video Inputs/Outputs | S-Video, Component |
| Dimensions (W x H x D) | 17.1 x 6.6 x 16.9 inches |
Instructions on safely moving the unit to prevent damage or short circuits.
Check connections and ensure proper setup before powering on.
Utilizes 32-bit DSP for faithful digital surround sound reproduction.
Enhances multi-channel audio from Dolby Surround or stereo sources.
Provides up to 5.1 channels of high-fidelity surround sound for DVD and DTV.
Offers 5.1 channels of surround sound for DVD, laser disc, and music.
Supports advanced multi-channel formats for enhanced surround playback.
Decodes high-quality digital signals for multi-channel surround sound.
Recreates 7.1-channel effects even with 5.1 sources.
Allows optimization of surround sound with two speaker types/positions.
Enables simultaneous listening of different sources in main and subrooms.
Provides component video input and output for superior picture quality.
7.1 channel inputs/outputs for future multi-channel format compatibility.
Details on connecting CD players, turntables, and tape decks.
For connecting digital audio equipment with digital output.
Connects tape deck for recording and playback.
Connects VCRs for recording, copying, and playback.
Connects DVD/VDP S-Video outputs to the unit's S-Video input.
Connects TV/DBS tuner S-Video output to the unit's S-Video input.
Connects VCR S-Video outputs/inputs for signal transfer.
Connects DVD player component video outputs to unit's component input.
Connects TV component video input to unit's component monitor out.
Instructions for connecting speakers to terminals.
Identifies and explains the functions of the front panel controls and indicators.
Configures speaker setup, size, and type.
Adjusts audio delays, levels, digital inputs, and video settings.
Checks connections and ensures correct setup before use.
Instructions for powering the unit on and off.
Chooses the desired audio/video input source.
Sets the input mode (Auto, PCM, DTS, Analog, Ext. IN).
High-quality playback mode that turns off video circuits.
Achieves good quality 2-channel sound while bypassing tone circuits.
Adjusts tone and sound while watching images.
Selects surround speaker configuration.
System diagram for multi-zone playback using pre-outs.
System diagram for multi-zone playback using speaker outs.
Uses test tones to balance speaker playback levels.
Fine-tunes individual speaker channel levels.
Adjusts front or rear channel volume simultaneously.
Chooses between Cinema, Music, or Emulation modes.
Selects DTS NEO:6 mode for surround playback.
Configures surround parameters for DTS NEO:6.
Chooses playback mode for DTS NEO:6.
Steps for playing sources via digital input.
Selects AUTO or DTS input mode for digital signals.
Chooses the input source for audio delay adjustment.
Explains DTS Neo:6 for 6.1-channel playback.
Details DTS 96/24 format for high-quality audio sources.
