Denon AVR-3803

1
2
Select the input source.
[ Playback with a digital input I
_ Select an input source set to digital (COAXIAL/OPTICAL)
(see page 24).
_ur_Tl°_ VDp
(Main unit} (Remote control unit)
_2_Set the input mode to "AUTO" or "DTS".
_COE
(Main unit) (Remote control unit)
Select the Dolby/DTS Surround mode.
SU_ND
(Remote control unit}
When performing this operation from the main unit's panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro logic il or DTS NEO:6.
81jRRC4JND SELECT
MODE
(Main unit) (Main unit)
rrll_---q _ mark.
Play a program source with the =_e_TAL ,
m • The Dolby Digital indicator lights
DIGITAL
_O_ Light when playing Dolby Digital sources.
_ Light
SIGNAL
DE_ECT
i_Cr Light
• The DTS indicator lights when playing
DTS sources.
The SIGNAL DETECT LED lights
when playing 6.1-channel surround
sources containing the identification
signal.
"_ When the SIGNAL DETECT LED is lit, we recommend
turning the surround back channel using the SURROUND
BACK button on the remote control unit and main unit
during playback.
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFR
(Main unit) (Remote control unit)
SURROUND
8ACKCN • Lights when the Surround Back CH is
OUTPUT
_ on.
__O_ Light
1 3
1
3 2 4,5 2,6
59