Denon AVR-3310

Questions and Answers:

C
Charles ReynoldsAug 18, 2025
How to troubleshoot no sound from speakers on my Denon AVR-3310 Receiver?
- R
  Rebecca DavisAug 18, 2025
  If no sound comes from the speakers connected to your Denon Receiver, try these steps: * Ensure that all input devices and speaker cables are properly connected. * Verify that your playback devices are connected and the correct input source is selected. * Adjust the master volume to a suitable level. * Deactivate mute mode. * Unplug any connected headphones. * Choose an input source that has a digital input setting. * Ensure the digital input terminal matches the input mode.
H
Hannah AndersonAug 21, 2025
What to do if Denon AVR-3310 remote control not working properly?
- D
  Douglas JordanAug 21, 2025
  If your Denon Receiver isn't responding to the remote control, try these solutions: * Replace the batteries with new ones. * Ensure you are within 7 meters and 30 degrees of the receiver. * Remove any obstacles between the remote and the receiver. * Check the battery polarity (+/-) when inserting them. * Move the unit away from strong light sources that may interfere with the remote sensor. * Confirm that the remote control IDs of the main unit and remote match. * Ensure the function button on the remote is properly set.
A
Andrew CastroAug 23, 2025
Why does my Denon Receiver power off suddenly and the power indicator flashes red quickly?
- D
  Desiree AshleyAug 23, 2025
  If your Denon Receiver suddenly powers off and the power indicator flashes red quickly, it could be due to the following reasons: * Ensure that you are using speakers with the correct impedance. * Check the speaker cables for any loose strands touching each other or the receiver's rear panel. If found, unplug the power cord, twist the core wires together tightly, and reconnect.
L
Larry SmithAug 26, 2025
Why does my Denon AVR-3310 Receiver power off suddenly and the power indicator flashes red slowly?
- M
  Michael PetersonAug 26, 2025
  If your Denon Receiver's power suddenly switches off and the power indicator flashes red slowly, it may be due to overheating. The protection circuit activates when internal parts get too hot. Switch off the power immediately, and allow the unit to cool down before reapplying power. Also, ensure the receiver is installed in a well-ventilated area.
E
Emily FernandezAug 28, 2025
Why Denon AVR-3310 power does not turn on?
- C
  Charles SmithAug 28, 2025
  If your Denon Receiver doesn't turn on or turns off immediately after being turned on, check that the power plugs are securely inserted into both the receiver's AC inlet and the wall power outlet.
B
Brad GonzalezAug 30, 2025
How to fix Denon AVR-3310 set does not operate properly?
- C
  christopher18Aug 30, 2025
  If your Denon Receiver is not operating properly, try resetting the microprocessor.
P
pamela12Sep 1, 2025
How to output HDMI audio signals from speakers on Denon AVR-3310?
- T
  thomas53Sep 1, 2025
  If HDMI audio signals are not being output from the speakers on your Denon Receiver, set 'Audio Out' to 'AMP' to enable HDMI audio output.
J
Jaime HuntSep 4, 2025
Why no picture appears with HDMI connections on my Denon Receiver?
- M
  Mark WhiteSep 4, 2025
  If you're not getting a picture with HDMI connections on your Denon Receiver, consider the following: * Check that the HDMI connectors are securely connected. * Ensure the input source assigned to the HDMI terminal is selected in 'Input Assign'. * Verify that your monitor supports copyright protection (HDCP). * Confirm that the output format (HDMI FORMAT) of the connected player matches the TV’s compatible input formats.
P
pamyoungSep 6, 2025
How to fix no picture on my Denon AVR-3310?
- W
  waltonshelbySep 6, 2025
  If no picture is appearing on your Denon Receiver, here are some things to check: * Make sure the video output terminals of the receiver are correctly connected to the TV's input terminals. * Ensure the TV's input setting is correctly configured for the input terminals connected to the receiver. * Deactivate the PURE DIRECT mode. * Set the player to interlace (480i/576i) signals because high definition (1080i/720p) and progressive (480p/576p) video signals are not down-converted. * Verify the 'Video Select' setting.
M
Matthew WellsSep 8, 2025
Why is the display off on my Denon AVR-3310?
- K
  Kimberly AndersonSep 8, 2025
  If the display on your Denon Receiver is off, try the following: * Adjust the dimmer function to a setting other than 'OFF'. * If you are in Pure Direct mode, cancel it, as the display turns off in this mode.

Denon AVR-3310 Specifications

General

Equalizer	Yes
Product color	Black
Frequency range	10 - 100000 Hz
Total Harmonic Distortion (THD)	0.05 %
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Connectivity technology	Wired
Headphone connectivity	3.5 mm
S-Video outputs quantity	2
Digital audio optical out	1
S-Video inputs quantity	7
Digital audio optical in	3
Dimensions (WxDxH)	434 x 414 x 171 mm
HDMI ports quantity	5
Power consumption (standby)	1 W
Power consumption (typical)	780 W