Denon AVR-3310 User Manual


Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Setting items Setting contents
Surround Parameters
Adjust surround sound
parameters.
Mode : Set the play modes for the different surround modes.
In the PLgx or PLg mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
Game : Surround sound mode optimized for games.
Pro Logic : Dolby Pro Logic playback mode (PLg mode only).
In the PLgz mode
Height : Dolby PLgz Height playback mode.
In the DTS NEO:6 mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
When “Surround Parameters” – “Front Height” (vpage 68) is set to
“ON”, the “Height” mode is set automatically.
The “Music” mode is also effective for movie sources including a lot of
stereo music.
The “Cinema” and “Music” modes can also be set by pressing [CINEMA]
or [MUSIC].
n
n
n
•
•
•
Cinema EQ : Soften the treble range of movie soundtracks for better
understanding.
OFF : “Cinema EQ” is not used.
ON : “Cinema EQ” is used.
•
•
DRC : Compress dynamic range (difference between loud and soft
sounds).
Auto : Automatic dynamic range compression on/off control according
to source. This can be set in the Dolby TrueHD mode.
Low / Middle / High : These set the compression level.
OFF : Dynamic range compression always off.
•
•
•
Setting items Setting contents
Surround Parameters
(Continued)
D.COMP : Compress dynamic range (difference between loud and soft
sounds).
OFF : Turn dynamic range compression off.
Low / Middle / High : These set the compression level.
•
•
LFE : Adjust the low-frequency effects level (LFE).
–10dB ~ 0dB
For proper playback of the different sources, we recommend setting
to the values below.
Dolby Digital sources : “0dB”
DTS movie sources : “0dB”
DTS music sources : “–10dB”
•
•
•
•
Center Image : Assign center channel signal to front left and right channels
for wider sound.
0.0 ~ 1.0 (0.3)•
Panorama : Assign front L/R signal also to surround channels, for wider
sound.
OFF : Do not set.
ON : Set.
•
•
Dimension : Shift sound image center to front or rear, to adjust playback
balance.
0 ~ 6 (3)•
Center Width : Assign center channel signal to front left and right channels
for wider sound.
0 ~ 7 (3)•
Delay Time : Adjust delay time to control sound stage size.
0ms ~ 300ms (30ms)•
Effect Level : Adjust effect signal level.
1 ~ 15 (10)
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
•
Adjusting the Sound (Audio Adjust)
Default settings are underlined.
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 25).
The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently set surround
mode. For details on the adjustable parameters, see “Surround Modes and Parameters” (vpage 92).
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
See overleaf
Playback

Denon AVR-3310 Specifications

General

Equalizer	Yes
Product color	Black
Frequency range	10 - 100000 Hz
Total Harmonic Distortion (THD)	0.05 %
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Connectivity technology	Wired
Headphone connectivity	3.5 mm
S-Video outputs quantity	2
Digital audio optical out	1
S-Video inputs quantity	7
Digital audio optical in	3
Dimensions (WxDxH)	434 x 414 x 171 mm
HDMI ports quantity	5
Power consumption (standby)	1 W
Power consumption (typical)	780 W

Weight and Dimensions

Weight	12900 g