How to fix Denon AVR-3311 when it doesn't turn on?
If your Denon Receiver doesn't turn on, ensure the power plug is correctly inserted into the power outlet. If it still doesn't turn on, the protection circuit might be active. Disconnect the power plug, wait 5 to 10 seconds, and then re-insert it.
What to do if the power indicator is blinking red on my Denon AVR-3311?
This issue may arise if the speaker cable has shorted or if the speakers do not have the specified impedance. Ensure you are using speakers with the correct impedance. Also, check the speaker cables; firmly twist the core wire in the speaker cable, and then reconnect it to the speaker terminal to ensure it is not touching anything.
Why isn't the Denon Receiver responding to the remote control?
Try the following: 1. Replace the batteries with new ones. 2. Ensure you are within 7 meters of the unit and within a 30° angle. 3. Remove any obstacles between the remote and the unit. 4. Make sure the batteries are inserted correctly, checking the + and - marks. 5. Move the unit if the remote control sensor is exposed to strong light.
How to fix a Denon AVR-3311 when the power does not turn on?
First, verify that the power plug is correctly inserted into the power outlet. If it still doesn't turn on, the protection circuit may be active. Disconnect the power plug from the electric outlet, wait 5 to 10 seconds, and then re-insert it.
Why can't I connect to preset radio stations on my Denon Receiver?
It may be due to the radio station not currently broadcasting or the radio station is no longer in service. Wait a while before trying again or note that it is not possible to connect to radio stations that are no longer in service.
How to turn on the display on my Denon Receiver?
Set “Dimmer” on the menu to something other than “OFF”.
How to troubleshoot no picture on Denon AVR-3311 Receiver?
If no picture appears when using your Denon Receiver, check the TV connection and ensure the TV input is set correctly.
How to turn on the display on a Denon AVR-3311?
If the display is off on your Denon Receiver, set the “Dimmer” on the menu to something other than “OFF”.
Why is there no audio output with HDMI connection on my Denon AVR-3311?
First, check the connection of the HDMI connectors. If you're trying to output audio from the speakers, make sure that the 'HDMI Audio Out' setting in the menu is set to 'AMP'. If you're trying to output audio from the TV, set 'HDMI Audio Out' to 'TV'.
Why can't I play Internet radio on my Denon AVR-3311 Receiver?
Check that the Ethernet cable is properly connected and that your network is connected. Ensure that the program is being broadcast in a compatible format (MP3 and WMA are supported). Verify that your computer’s or router’s firewall is not activated. Make sure the radio station is currently broadcasting and that the set’s IP address is correct.
Essential guidelines for safe operation, including warnings and precautions.
Compliance information and notices related to the Federal Communications Commission rules.
Lists the parts supplied with the product for initial setup and use.
Provides information on manual structure, operation buttons, and symbols used.
Explains the initial installation procedure for setting up the unit.
Details the connection process for speakers, TV, and other devices.
Guide for speaker connection and setup, including Audyssey® Auto Setup.
Instructions on how to prepare and place the setup microphone for calibration.
Guidance on setting up the subwoofer for optimal performance with Audyssey.
Steps for setting the zone mode and operation mode using the remote.
General guidelines and notes for making component connections.
Explains the unit's capability to convert and output various video signal formats.
Covers basic playback operations for connected media devices.
Guide to choosing suitable surround modes for different audio sources.
Details the system requirements for connecting to a home network.
Provides context on SIRIUS XM and HD Radio services.
Explains how to receive HD Radio broadcasts and their features.
Details how to play music files and playlists from a computer via network.
Describes standard playback and surround options for various sources.
Guide for installing and connecting speakers beyond a 5.1-channel setup.
Covers advanced playback features and operations.
Explains how to access and adjust various detailed settings.
Details on linking and controlling devices via HDMI.
Describes how to save and recall frequently used settings.
Explains how to set the unit to automatically enter standby.
Guide to adjusting individual speaker volume levels.
Provides an overview of menu items and their corresponding pages.
Illustrates how input sources are assigned to connectors.
Adjusts surround sound parameters for various modes.
Manual configuration for speaker settings like size and distance.
Sets speaker configuration for 2-channel direct and stereo playback.
Memorizes surround mode settings for each input signal type.
Adjusts the low frequency range (bass) for multi-zone audio.
Adjusts the high frequency range (treble) for multi-zone audio.
Sets the signal output type (Stereo or Mono) for multi-zone audio.
Identifies and explains the functions of various buttons and terminals.
Provides solutions for common issues and operational problems.
Lists technical specifications for the unit and its accessories.
Instructions for operating other AV equipment using the main remote control.
Instructions for operating other AV equipment using the sub remote control.
Diagram and explanation of the main remote control unit's buttons.
Diagram and explanation of the sub remote control unit's buttons.
Instructions for correctly inserting batteries into the remote controls.
Table detailing speaker usage and adjustable parameters for each surround mode.
Troubleshooting steps for common issues like no power or display problems.
Solutions for issues related to video output, such as no picture.
Troubleshooting steps for audio and video output issues with HDMI connections.
Technical specifications related to the unit's amplifier and audio output.
Technical specifications for HD Radio reception.
General specifications including power supply, dimensions, and weight.
General| Receiver type | Surround |
|---|---|
| Frequency range | 10 - 100000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 7.1 channels |
| Audio A/D Converter (ADC) | 24-bit/192kHz |
| Signal-to-Noise Ratio (SNR) | 102 dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| Power output per channel (1KHz@6 Ohm) | 165 W |
| Power output per channel (20-20KHz@8 Ohm) | 125 W |
| Optical drive included | No |
| Display | LED |
| Equalizer | Yes |
| HDMI version | 1.4a |
| Product color | Silver |
| Audio decoders | DTS 96/24, DTS-ES (Discrete 6.1), DTS-HD, DTS-HD Master Audio, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD |
| Volume control | Rotary |
| Multi-Zone quantity | 4 |
| Apple docking compatibility | iPod Classic 4, iPod Classic 5, iPod Mini 1, iPod Mini 2, iPod Nano 1, iPod Nano 2 |
| Supported video modes | 1080p |
| HDMI in | 6 |
| Audio (L/R) in | 9 |
| Composite video in | 5 |
| USB ports quantity | 1 |
| S-Video inputs quantity | 2 |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Image formats supported | JPG |
| AM band range | 522 - 1611 kHz |
| FM band range | 57.5 - 108 MHz |
| Composite video out | 3 |
| Headphone connectivity | 3.5 mm/6.35 mm |
| Digital audio coaxial out | 0 |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 670 W |
Weight and Dimensions| Depth | 381 mm |
|---|---|
| Width | 434 mm |
| Height | 171 mm |
| Weight | 12200 g |
To Next Page
