Denon AVR-3310 User Manual


Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Making the Input Settings (Input Setup)
Setting items Setting contents
iPod dock
Assign the control dock for
iPod input.
The control dock for iPod can be assigned to the
CD DVD HDP
TV SAT/CBL VCR DVR V.AUX
input sources.
Assign : Assign the control dock for iPod to the selected input source.
None : Do not assign the control dock for iPod to the selected input
source.
By default on first use, it is assigned to “VCR (iPod)”.
An input source to which control dock for iPod cannot be assigned is
displayed as “– – –”.
If control dock for iPod is not connected to the AVR-3310, assignment
of the “iPod dock” is disabled, and you can use it as a standard input
source.
•
•
•
Default
Reset all settings to factory
default.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
If you select “Default” and press ENTER the message “Default
Setting?” is displayed. Select “Yes” or “No”, and then press ENTER.
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
Setting items Setting contents
Video Select
Change video input to your
preferred input source.
Source : Play the picture and sound of the input source.
DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input
source to view. This can be set for individual input sources.
Set by either pressing <VIDEO SELECT> on the main unit or [VIDEO
SELECT] on the main remote control.
When operating from the main remote control unit
Press [VIDEO SELECT] repeatedly until the picture you want to see is
displayed.
To cancel, press [VIDEO SELECT], and select “Source”
When operating from the main unit
After pressing <VIDEO SELECT> on the main unit, turn the <SOURCE
SELECT> on the main unit until the picture you want to see is displayed.
To cancel, press <VIDEO SELECT>, then turn <SOURCE SELECT> and
select “Source”.
NOTE
It is not possible to select HDMI input signals.
The video select function does not work with HDMI signals.
Input sources for which “Delete” is selected at “Source Delete”
(vpage 40) cannot be selected.
•
•
•
•
•
Video Convert
The input video signal is
converted automatically in
function of the connected
TV (vpage 10 “Converting
Input Video Signals for
Output (Video Conversion
Function)”).
This can be set when the input source is
DVD HDP TV SAT/CBL
VCR DVR V.AUX
.
ON : The input video signal is converted.
OFF : The input video signal is not converted.
When a non-standard video signal from a game machine or some other
source is input, the video conversion function might not operate. In this
case set “Video Convert” to “OFF”.
When “Video Convert” is set to “OFF”, the video conversion function
does not work. In this case, connect the AVR-3310 and TV with the same
type of cable.
•
•
Making the Video Settings (Video)
Default settings are underlined.
Settings

Denon AVR-3310 Specifications

General

Equalizer	Yes
Product color	Black
Frequency range	10 - 100000 Hz
Total Harmonic Distortion (THD)	0.05 %
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Connectivity technology	Wired
Headphone connectivity	3.5 mm
S-Video outputs quantity	2
Digital audio optical out	1
S-Video inputs quantity	7
Digital audio optical in	3
Dimensions (WxDxH)	434 x 414 x 171 mm
HDMI ports quantity	5
Power consumption (standby)	1 W
Power consumption (typical)	780 W

Weight and Dimensions

Weight	12900 g