Denon AVR-3803

When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the
audio delay to delay the sound and synchronize [t with the picture.
The audio delay setting is stored separately for each input source.
1
_} Select the input source. 1
{Main unit) {Remote control unit}
/(2} Set the input mode to "AUTO".
{Main unit) (Remote control unit}
(3) Select the Dolby/DTS Surround.
DOLBY DIS
$URR_ND
(Remote control unit}
_} Playa program source (DVD, etc.).
Press the SYSTEM SETUP button and display the System
Setup Menu screen.
SETUp
{Remote control unit)
System Setup Menu
TSpeaker Configuration
Delay Time
Channel Level
Digital In Assignment
Video Setup
Dolby Digital Setup
Zone2 Control
1
I
4
Select "Audio Delay" on the System Setup Menu screen.
{Remote control unit)
System Setup Menu
_Audio Delay
Ext. In SubwooferLevel
Auto Surround Mode
On Screen Display
Trigger Out Setup
Auto Tuner Presets
Setup Lock
Switch to the Audio Delay adjustment screen.
{Remote control unit)
Audio Delay 4 0ms
Set the delay time. (0 ms - 200 ms)
G
{Remote contlol unit)
Audio Delay 4 200ms
With a movie source, for example, adjust so that the
movement of the actors' lips is synchronized with the sound.
_,_ Enter the setting.
The System Setup Menu reappears.
{Remote control unit}
Press the SYSTEM SETUP button to complete the setting.
NOTE:
The audio delay setting does not apply when playing [n the EX_. IN
mode or in the analog input direct mode or stereo mode (TONE
DEFEAT "ON").
61