Selecting the input source
1
Press the input source select button to be played back.
The selected input source appears on the display.
0
This unit switches between DAB and FM each time TUNER is pressed.
0
This unit switches between Optical In 1 and 2 each time OPTICAL IN is pressed.
0
You can also select the input source by pressing INPUT on the main unit.
Adjusting the volume
1
Use VOLUME df to adjust the volume.
The volume level appears on the display.
0
You can also adjust the volume by pressing VOLUME df on the main unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE O.
“Mute” is displayed on the display.
0
To cancel mute, either adjust the volume or press MUTEO again.
Contents Connections Playback Settings Tips Appendix
36
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
