.
A
Power operation button (X)
This turns the power on/off (standby). (v p. 34)
B
Standby indicator
Lights as follows according to unit status:
0
Not lit:
0
When powered on
0
During normal standby (When “Auto-Play” is set to
“Off” (v p. 94))
0
Orange:
0
When “Auto-Play” is set to “On” (v p. 94)
0
When “Network Control” is set to “On” (v p. 101)
C
Cursor keys (uio p)
These select items.
D
ENTER key
This determines the selection.
E
Display
This displays various pieces of information.
F
Volume control knob
Adjusts the volume.
G
USB port (T)
This is used to connect USB storages (such as USB memory devices).
(v p. 27)
H
Headphones jack
Used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the connected speakers.
NOTE
0
To prevent hearing loss, do not raise the volume level excessively when using
headphones.
I
BACK key
Returns to the previous item.
J
Input source switching key (q)
This selects the input source.
K
Remote control sensor
This receives signals from the remote control unit. (v p. 8)
Contents
Connections Playback Settings Tips Appendix
13
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
