Proceeding : TOP COVER → AMP ASSY
(1) Remove the screws.
(2) Cut the wire clamps. Remove the CORD HOLDER.
Remove the connector.
2. AMP ASSY
x1
x4
N621
N231 N241
N711 N511
CUT
Loose wire clamp
CORD HOLDER
CUT
Proceeding : TOP COVER → DIGITAL ASSY
(1) Remove the screws.
(2) Remove the screws. Remove the FFC.
(3) Remove the connector. Remove the STYLE PIN.
3. DIGITAL ASSY
↑Shooting direction: A↑
x3
↑Shooting direction: D↑
x2
FFC
FFC
↑Shooting direction: D↑
N1210 N1020 N1410 N710 N1010 N630
STYLE PIN
38
Caution in
servicing
Electrical Mechanical Repair Information Updating
To Next Page
Loading...
