Denon PMA-1600NE - Connecting and Playing Back from a Digital Device (Coaxial;Optical)

Proceeding : TOP COVER → SUPPLY PCB → AC PCB
(1) Remove the screws. Remove the connector. Remove the STYLE PIN. Remove the CORD HOLDER.
Cut the wire clamps.
Proceeding : TOP COVER → SUPPLY PCB → AC PCB → TRANS
(1) Remove the screws. Remove the CORD HOLDER.
Cut the wire clamps.
6. AC PCB
↑Shooting direction: C↑
x1
x1
N631
N211
N221
N371
N381
CUT
7. TRANS
↑Shooting direction: C↑
x8
x1
CORD HOLDER
CUT
CUT
40
Caution in
servicing
Electrical Mechanical Repair Information Updating