Denon PMA-1600NE - Page 36

6
Press X on this unit.
0
When the unit power is turned on, the PC automatically finds and
connects to the unit.
7
Press the input source select button (USB-DAC) to
switch the input source to
“USB-DAC”.
8
Checking the installed driver.
A
Click the “Start” button and click “Control Panel
” on the PC.
0
The control panel setting list is displayed.
B
Click the “Sound” icon.
0
The sound menu window is displayed.
C
Check that there is a checkmark next to “Default Device” under in
“PMA-1600NE” of the “Playback” tab.
0
When there is a checkmark for a different device, click
“PMA-1600NE” and “Set Default”.
9
Checking audio output.
Outputs a TEST signal from the PC and checks the audio output
from the USB-DAC function.
A
Select “PMA-1600NE” and click
“Properties”.
0
The PMA-1600NE Properties window is displayed.
.
PMA-1600NE
q
Contents Connections Playback Settings Tips Appendix
36
Front panel Rear panel
Remote control
unit
Index
I
V
\
I
V V
,:i Sound
Pla yba ck Recording Sotms Coornunications
Se lect a playback dievice belo w to modify its setti ngf :
Dig ital A ud io Interfa ce
Default Dievice
Speaker
Rea Itek High Definition A ud io
Ready
=
=
=
=
=
=
=
\