Denon PMA-A100 - Page 19

19
17 P07(INT2) REMOTE_IN I (INT) Remote control input by codes
18 VAREF VAREF - It connects it with the same power supply as VDD of 5pin.
19 AVDD AVDD - It connects it with the same power supply as VDD of 5pin.
20 P60(AIN0) RESERVED O
21 P61(AIN1) P.OFF O Output port ="L" fixed
22 P62(AIN2) REC OUT_SEL I (A/D) REC OUT SELECTOR Positional detection input
23 P63(AIN3) FUNCTION I (A/D) INPUT SELECTOR Positional detection input (FUNCTION)
24 P64(AIN4/STOP0) RESERVED O
25 P65(AIN5/STOP1) RESERVED O
26 P66(AIN6/STOP2) P.DIRECT_SW I P.DIRECT TACT SW key input
27 P67(AIN7/STOP3) RESERVED O
28 P70(AIN8) PHONO O PHONO line RELAY/LED control signal
29 P71(AIN9) CD O CD line RELAY/LED control signal
30 P72(AIN10) TUNER O TUNER line RELAY/LED control signal
31 P73(AIN11) LINE1 O LINE1 line RELAY/LED control signal
32 P74(AIN12) LINE2 O LINE2 line RELAY/LED control signal
33 P75(AIN13) RECORDER1 O RECORDER1 line RELAY/LED control signal
34 P76(AIN14) RECORDER2 O RECORDER2 line RELAY/LED control signal
35 P77(AIN15) RESERVED O
36 P40 P.DIRECT O POWER AMP DIRECT RELAY control signal output
37 P41(RXD2) LED_R O LED lighting output of R (power supply ON/OFF for LED)
(STANBY : lighting / Standing up and PROTECT : Flashing)
38 P42(TXD2) LED_G O "LED lighting output of G (Power supply ON/OFF for LED)
(After standing up : Lighting. )
39 P43 RESERVED O
40 P44(SI2) COPY_21
⇒ REC1 OUT_ON/OFF
O ON/OFF of RECORDER1 output
"H"= ON
41 P45(SO2) COPY_12
⇒ REC2 OUT_ON/OFF
O ON/OFF of RECORDER2 output
"H"= ON
42 P46(#SCK2) REC1_SOURCE
⇒
REC1_SOURCE/REC2
O Switch of RECORDER1 output
"L"= SOURCE, "H"= RECORDER2 (RECORDER2 → 1)
43 P47 REC2_SOURCE
⇒ REC2_SOURCE/REC2
O Switch of RECORDER2 output
"L"= SOURCE, "H"= RECORDER1 (RECORDER1 → 2)
44 P10(TC1) PRE OUT O PRE OUT line RELAY control signal
45 P11(#DVO) SP OUT O "SPEAKER RELAY control signal
It is ON/OFF as for the power supply for SP_RELAY.
46 P12(#PPG) H/P OUT O HEAD PHONE output line RELAY control signal
47 P13(TC3/#PDO3/
#PWM3)
AC RELAY1 O AC RELAY 1 control output (MAIN power supply)
48 P14(TC4/#PDO4/#PPG4) RESERVED
(AC RELAY2)
ONON
49 P15(INT3/TC2) PROTECT_2 I (INT) PROTECTION input2 (DC protect & temperature protect)
50 P16(#PDO5/#PWM5/
TC5)
VOL_DOWN O Motor driver LB1930M IN2 control output
(Electric VR DOWN)
51 P17(#PDO6/#PWM6/
#PPG6/TC6)
VOL_UP O Motor driver LB1930M IN1 control output
(Electric VR UP)
52 P50(SCL) RESERVED* O
53 P51(SDA) RESERVED* O
54 P52 RESERVED* O/I
55 P53 H_VOLTAGE* I Twice voltage detection input
56 P54 MODEL_SEL* I
"Model distinction input ① PMA2000AEX PD "L"
② PMA1500ZEX PU “H"
57 P30 RESERVED* O
58 P31 RESERVED* O
Pin
No.
Terminal name Signal name I/O Function