Listen to audio from PC or Mac
1. Power on.
2. Press INPUT SELECT to switch the input source to “USB-DAC”.
3. Set the audio signal destination to this unit on
4. Set the audio signal destination to this unit on the computer.
Windows OS
1. Click the “Start” button and click “Control Panel” on the PC.
The control panel setting list is displayed.
2. Click the “Sound” icon.
The sound menu window is displayed.
3. Check that there is a checkmark next to “Default Device” under in “PMA-A110” of the “Playback” tab.
When there is a checkmark for a diff erent device, click “PMA-A110” and “Set Default”.
4. Select “PMA-A110” and click “Properties”.
The PMA-A110 Properties window is displayed.
To Next Page
Loading...
