Denon POA-F100 - Safety Precautions; Specifications

1 OO ee
SAFETY PRECAUTIONS
The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.
SPECIFICATIONS
Rated output power:
Total harmonic distortion:
Frequency response:
Input sensitivity:
Input impedance:
S/N ratio:
Output terminals:
Power supply:
Power consumption:
Dimensions:
20 W (6 Q/ohm Load) 1 kHz, T.H.D. 0.7 %
25 W (6 Q/ohm Load) 1 kHz, T.H.D. 10 %
0.08 % (-3 dB at rated output, 8 Q/ohms, 1 kHz)
10 Hz ~ 50 kHz (+1, -3 dB, at 1 W)
460 mV (Normal in)
47 kQ/kohms — (Normal in)
90 dB (IHF, A-weighting, Normal)
Speakers: 6 ~ 16 Q/ohm
AC 230 V, 50 Hz
72W
270 (W) x 84 (H) x 266 (D) mm
(including control knobs and feet)
3.9 kg
® Specifications and contents are subject to change without notice for purposes of improvement.