22
(Using the remote control unit)
Example: Playing the 8th track
1
Press the CD button on the remote control unit.
2
Press the button corresponding to the number of the track 8.
• “8” appears on the track number display and playback of track
number 8 begins.
• When the end of the track is reached, playback continues on the next track.
• To specify a track number of 11 or greater, say track 15, press then , and to specify a
track number of 20 or greater, say track 23, press , , then .
To play track 20, press then .
• The system is in program play mode if “Pxx (xx:program number)” lights in the display. To
cancel the program play mode, press PROG/DIRECT button before you input the desired track
number.
10
+
10
3+
10
+
10
5+
10
Various Playback Functions
1
2
In addition to the regular playback, the RCD-M35DAB/RCD-M33 also offers the following
playback functions:
(1) Playing a specific track ………………………………………………………………………………
Direct Search
(Using the remote control unit)
1
When the REPEAT button is pressed once, “ ” appears on
the display and the single track repeat mode is set.
2
Use the 8 and 9 buttons to select the track to be repeated.
• When the end of the specified track is reached, playback starts over from the beginning of
that track.
• The single-track repeat mode can also be set by pressing the REPEAT button once during
playback.
• To cancel the single-track repeat mode, press the REPEAT button repeatedly until the “ ”
indicator turns off.
(2) Playing a single track repeatedly …………………………………………………………………
Single- track Repeat
3
Press the 1/ 3 (play/pause) button to start playback.
(Using the remote control unit)
(3) Playing all the tracks repeatedly ……………………………………………………………………
All-track Repeat
1
When the REPEAT button is pressed twice, “ ” appears
on the display and the all-track repeat mode is set.
2
Press the 1/ 3 (play/pause) button to start playback.
• The all-track repeat mode can also be set by pressing the REPEAT button twice during
playback.
• To cancel the all-track repeat mode, press the REPEAT button to turn the “ ”
indicator off.
• If the REPEAT button is pressed during programmed playback, the tracks are played
repeatedly in the programmed order.
To Next Page
Loading...
