Operation buttons Function
1/3
Playback / Pause
2
Stop
8 9
Skip to previous track / Skip to next track
6 7
(Press and hold)
Fast-reverse / Fast-forward
0 – 9, +10 Select the track
RANDOM Random playback
REPEAT
Repeat playback
0
Switching between Single-track repeat
and All-track repeat.
INFO Switching the elapsed time display
Playing tracks in a specific order
(Program playback)
Up to 25 tracks can be programmed.
1
In the stop mode, press PROGRAM.
“PGM” is displayed.
2
Use 0 – 9 and +10 to select the tracks you want to
program.
GExampleH
To program tracks 3, 12 to play in that order: Press 3, +10 and 2 one
after the other.
3
Press 1/3.
Playback starts in the programmed order.
0
The program is cleared when the disc tray is opened or the power is turned off.
0
In the stop mode, press CLEAR, the last track programmed is cleared.
Press 9 to select the track you want to delete.
0
In the stop mode, press PROGRAM, clear the all programmed track.
0
When RANDOM is pressed during program playback, the programmed tracks are
played in random order.
0
When REPEAT is pressed during program playback, the tracks are played
repeatedly in the programmed order.
Contents Connections Playback Settings Tips Appendix
28
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
