C
VOLUME SELECT
Use ui to adjust the volume, then press ENTER.
D
ON TIME
Use ui to select “hours” for the alarm start time, then press
ENTER.
Use ui to select “minutes” for the alarm start time, then press
ENTER.
E
OFF TIME
Use ui to select “hours” for the alarm stop time, then press
ENTER.
Use ui to select “minutes” for the alarm stop time, then press
ENTER.
F
ALARM ON/OFF
Use o p to select “ON” or “OFF” for the alarm, then press
ENTER.
0
The s indicator lights and the alarm setting is entered.
0
The alarm settings are displayed for 3 seconds.
2
Press POWER X to set the power to standby.
Alarm standby mode is set, and the power indicator lights orange.
ALARM ON/OFF
Set the timer playback to on or off.
1
Use ui to select “ONCE” or “EVERYDAY”.
2
Use o p to select “ON” or “OFF” for the alarm, then
press ENTER.
The alarm settings are displayed.
0
When set to “OFF”, time operation is disabled, but the alarm
settings remain unchanged.
Contents Connections Playback Settings Tips Appendix
54
Front panel Display Rear panel Remote Index
To Next Page
Loading...
