2.9. Output/interrupt the light
Push the MODE button,
the time would be changed as
followed 10 secs
→
20 secs
→
30 secs
→
40 secs
→
10
secs
→
20 secs...
When LEDEX
TM
WL-070 hand piece is turned on, push
the ON/OFF button again to output the light. Final
countdown will be showed on the display.
During the exposure time, the operator can push
the ON/OFF button to turn off the light. Then the
system will generate one beep and reset the time
automatically.
Wait for 3 seconds. When display shows the
second again, the system will memorize the
setting and save it as default.
Press the MODE button again to switch
between or .
Mute
Unmute
EN
7
To Next Page
Loading...
