Dentmate LEDEX WL-070 - Charging the battery and plug-in use

Connect the power supply to AC100~240 V
electronic socket and plug-in the connector to
LEDEX
TM
WL-070 hand piece. Push the ON/OFF
button to turn on the LEDEX
TM
WL-070 hand
piece.
When the battery is charging, the Display will
glow and show the sign of “CH”.
When the battery is fully charged, the Display
will glow and show the sign of “FC”.
The battery is only charged to about 60% prior to the shipment. Each time,
charge it fully before using it.
2.6. Charging the battery and plug-in use
Charging
Fully
charging
Plug-in use
When the battery is malfunctioned and can’t
be charged, you still can use LEDEX
TM
WL-070
handpiece.
Connect the power supply to AC100~240 V
electronic socket and plug-in the connector to
the LEDEX
TM
WL-070 hand piece. Even when
the battery is in the low status, you still can use
LEDEX
TM
WL-070 hand piece.
EN
5