Light intensity
Recommended Curing Time (on STANDARD mode)
Fill Materials Curing time
Universal composite (2 mm depth) 10 seconds
Universal composite (4 mm depth) 20 seconds
**Generally, these recommendations apply to situations. The emission window of the
light probe is placed directly over the material in order to be polymerized. Extend the
curing time accordingly to increase the distance between the light source and the
material.
Recommended curing modes
Mode Application
LOW Tooth and composite resin.
RAMP Wide area of composite resin, avoid shrinkage.
STANDARD Most cases.
HIGH For orthodontic or pediatric dentistry,
FAST ORTHO For orthodontic, easy to bond materials.
TURBO Dentalcement,porcelainveneer,berpost.
8
EN
To Next Page
Loading...
