Dentmate LEDEX WL-090 - Product Information; Indications for use

2. Product Information
The light has been manufactured with a super-high luminosity 10 W LEDs. The
light wavelength of LEDEX
TM
WL-090 is between 440 and 480 nm and the intensity
is up to 2400 mW/cm². It can cure the composite over 2 mm in 2 secs. These
characteristics enable the light to polymerize almost all photosensitive composite
resins.
LEDEX
TM
WL-090 dental curing light is characterized by :
• Six powerful extensive modes including Low, Ramp, Standard, High, Fast Ortho
and Turbo modes.
• The turbo light guide rod is made from genuine optical fiber and not inferior
acrylic that optimizes light conduction and minimizes loss of light from source to
tip. Therefore, it ensures the highest possible intensity of light at the light guide
tip.
• Advancedandhighefcientcoolingheatsinkaredesignedandaccompanied
with over temperature protection. A thermal protection circuit and safety mode
are also designed to protect the light from overheating.
• The automatic memorization of the last operation is another unique feature of the
light.
• There is display built-in radiometer and auto sleep designs for saving the energy
of the battery.
2.1. Indications for use
LEDEX
TM
WL-090 is a visible curing unit programmed for polymerization of dental
light cured materials by dental professionals.
FOR DENTAL USE ONLY!
2
EN