Dentmate LEDEX WL-090 - Installation and charging

2.5. Installation and charging
Startup
On receipt of the unit, any damages may occur during
transportation. If necessary, contact your supplier.
Handpiece
First of all, it is essential that the sterilizable accessories
which includes the light guide and protective shield
are sterilized and the unit base is disinfected (see the
chapter 7).
Remove the protective caps from the handpiece which
should to be kept during maintenance to prevent the
liquid products from damaging the LEDs. Then and
insert the sterilized light guide into the handpiece.
Ensure the light guide is properly inserted.
Battery
We recommend you to charge the battery fully before
therstuse.
Put the battery into the handpiece and rotate in the
clockwise direction until you hear the sound and feel it
clicked into the right place.
Ensure all the segments of the display are shown. The battery supplied is only charged
to about 60% prior to shipment. Each time, charge it fully before using it.
Click
5