FUNCTION DESCRIPTION
1. Charge the speaker
To charge the speaker’s built-in battery, connect power adaptor (not supplied) to the
charging port. Please make sure a DC 5V proper adaptor will be used, otherwise the
battery will be overheated and will be damaged. The charging LED light will be on when
charging, and will turn off when fully charged.
2. Bluetooth function
-Power on the product, the speaker will enter BT mode automatically.
-Or long press MODE button to enter BT mode.
- Put your mobile device (cell phones, computers, etc.) into BT pairing mode, search for
BT devices, and select the item name (Denver BPS-165) when it appears.
- After the device has been paired successfully for the first time, it will connect
automatically in around 10 seconds to the device last connected when next time use.
(Note: The product can connect to only one Bluetooth device at a time.).
3. TWS Function
Power on two speakers and enter Bluetooth mode.
Turn off the Bluetooth function on your phone or other Bluetooth device. Long press the
Play / Pause button of either speaker, the display will show “t-ON” and then the “BLUE.”
A voice prompt will then be heard to signify that the two speakers have connected via
Bluetooth.
Turn on Bluetooth on the mobile phone and search for “Denver BPS-165” and connect.
A voice prompt will then be heard signifying that the mobile has connected to the
speakers. You can now enjoy music from the two speakers.
To Next Page
Loading...
