Denver DVB 750 - Device Operations; Entering System and Modes; Basic Operation Functions; Configuration Menu Options

10
PresstheMutebuttontomutethesound,pressitagaintoswitchONthesound.
WhentheunitisinMutemode,pressingV+buttonwillswitchONthesoundandturn
itup,pressingV-buttonwillkeeptheunitsilenceandturndownthesound.
NOTE:
MAKESUREALLTHEEQUIPMENTSANDACADAPTOR
ARECONNECTEDPROPERLYANDTHEUNITISSETIN
CORRECTMODEBEFOREKINDSOFOPERATIONS.
2.BASICOPERATIONS
SELECTWANTEDPROGRAM
1
Pressnumberbuttonsontheremotecontroldirectlytoselectprogrammernumbers0-9.
4.Toselecttwodigitalprogrammernumbers,pressthechoosethe
mode,thenenteratwodigitalprogrammernumberasyouwantto.
“-/-- ” buttonand “--”
.PressCH-buttontoenternextchannel.
2.PressCH+buttontoenterpreviouschannel.
3.
VOLUMECONTROL
1.PresstheV+orV-toadjustthelevelofcurrentlyselecteditem.
2.ThelevelofVOLUMEandBALANCEcanbeadjustfrom0-24.
OPERATIONS
1.ENTER
-
Connecttheexternalantennatotheantennasocketlocatedonthebackoftheunit.
-Switchtheunittoon.
-PressTV/RADIObuttontoenterTV/RADIOmode.Youalsocanswitchtheunittodifferent
modebypressingFUNCTIONbutton.
:Ifthereisnosignalorthesignalistooweak,thescreenisblackandmosaicmay
appear.Evenaudiooutputstops.
Note
PressTFTMODEbutton,thescreenwilldisplay:
15
MUTECONTROL
TFTMODE
Config
Inthemainmenu,youcanpresstheleftorrightbuttontoselecttheicon.Inthis
menu,youcanselect,,,or
item.
Config
ClearDataTVSettingSetTimeSystemUpdateSystem
Information
ClearData
ConfigClearDataInmenu,youcanselectitem.