3
LCD DISPLAY
Muscle %
Fat %
Height Unit
Hydration %
Bone %
Age
Weight Unit
Calorie Unit
Fat Status Indication
Gender
User Memory Code
1. Locate the pound/kilogram (lb/kg) button under the scale
near the top of the scale. Select lb or kg weight reading
as desired. The scale will now weigh in pounds or
kilograms as indicated.
2. Press ON/SET button once. The user number will start ashing.
Select user number by pressing the two arrow buttons on the
right side to move the number up or down. Press the ON/SET
button when the desired user number is shown.
(Note: Up to 12 users can be programmed.)
3. After the ON/SET button is pushed, the gender icon will start ashing. Press the up or down
arrow to move between male and female. Press the ON/SET button.
4. In similar fashion, the display will prompt you to set your height and age. Press the
ON/SETbutton after the proper information is shown to move to the next ashing
display.Press START button once all information has been entered.
At the bottom of scale, you can
nd a unit conversion button as
shown in picture
To Next Page
Loading...
Need help?
General
