Need help?Do you have a question about the Detecto icon and is the answer not in the manual?
Advises users to read the manual and pay attention to notification symbols.
Warning about battery explosion risk if replaced with incorrect type and proper disposal of used batteries.
Lists standard features such as Dual Range Weight, Auto Weight Lock, StableSENSE, and Patient ID.
Details power requirements, AC adapter specifications, and installation responsibilities for 230 VAC.
Detailed instructions for connecting the column to the base, attaching the sonar bracket, and securing covers.
Details connecting the 12VDC wall plug-in adapter for power supply.
Instructions for connecting the Sonar Height Rod via a snap-in modular connector.
Information on using 12 "AA" batteries, compatibility, and the need for them to be of the same type.
Detailed steps for accessing battery holders, inserting batteries, and reassembling the scale.
Instructions on pressing LB/IN or KG/CM keys to choose preferred measurement units.
Function of the Menu key to launch the Setup Review screen and navigate to configuration.
Step-by-step guide for weighing a patient, including turning on, zeroing, and locking the weight.
Procedure for weighing a patient and assigning a numeric ID without calculating BMI.
Steps to weigh, measure height, and calculate BMI for a patient without using an ID.
Steps to enter known height for BMI calculation in pounds/inches or kilograms/centimeters.
Steps to weigh, measure height, calculate BMI, and assign a patient ID.
Steps to enter patient ID and known height for BMI calculation.
Steps to turn on the scale, access the Menu, and navigate to the Setup Review screen.
Explains how to review settings and navigate through the setup menu pages.
How to set the first and second weight range capacities for the scale.
How to toggle weighing and height units between lb/in and kg/cm, and calibration considerations.
Instructions for performing scale calibration with loaded and unloaded weights.
Steps to access the calibration function via the Menu and Setup Menu Page 5.
Possible solutions for AC and battery operation when the display does not turn on.
To Next Page
General
