3300-0192-0M Rev D 01/17 12
OPERATION
Zero Weight Display
1. In Gross Weight mode (POUNDS/GROSS or KILOGRAMS/GROSS shown on weight
screen), if scale is not showing zero weight on weight screen press 0 key.
2. Weight screen will return to zero (0.0) and CENTER ZERO will be displayed to show
that the scale is ready for use.
Basic Operation
To Weigh
1. Press
key to turn scale on.
2. If required, press 0 key to zero weight screen.
3. Assist patient on scale
4. When weight is stable, a beep will sound, weight reading will automatically lock and
AUTO LOCK will be displayed. Note that the amount of time the reading will hold is
dependent upon the Auto Locking setting in Setup. NOTE: If more time is needed,
press the
key to hold the locked weight reading.
5. Read weight display.
6. If desired, press the
key to output EMR/EHR data.
7. Assist patient off scale.
Basic Operation with ID – (No BMI)
To Weigh
1. Press
key to turn scale on.
2. If required, press 0 key to zero weight screen.
3. Press
key.
4. Display will change to show PATIENT ID screen.
5. Using numeric keys, enter up to an 8 digit numeric identification number.
6. Press Save key.
7. Assist patient on scale
8. When weight is stable, a beep will sound, weight reading will automatically lock and
AUTO LOCK will be displayed. Note that the amount of time the reading will hold is
dependent upon the Auto Locking setting in Setup. NOTE: If more time is needed,
press the
key to hold the locked weight reading.
9. Read weight display.
10. If desired, press the
key to output EMR/EHR data.
11. Assist patient off scale.
ALWAYS assist the patient in stepping on and off the scale platform to
ensure they do not fall. NEVER leave a patient unattended while they are on
the scale platform. Failure to maintain control of the patient at all times can
result in serious injury to you and/or the patient.
To Next Page
Loading...
Need help?
General
