3300-0192-0M Rev D 01/17 8
UNITS SELECTION
When the scale is powered on for the first time, the display will prompt for which weighing and
height units to use, LB/IN or KG/CM.
1. Press
key to turn the scale on.
2. The scale display will show the software version for a few seconds, the Detecto logo
briefly and then change to the Select Units screen.
Select Units
LB/IN KG/CM
3. Press the LB/IN key at the bottom left of the screen to select pounds for weighing units
and inches for height measurement.
4. Press the KG/CM key on the bottom right of the screen to select kilograms for weighing
units and centimeters for height measurement.
5. The scale is now ready for operation.
6. Once the units setting is selected, it will be kept.
NOTE: If it is desired to change the units setting, refer to the SCALE SETUP
section, Setup Menu Page 1, Units: selection.
To Next Page
Loading...
Need help?
General
