Detecto 750 User Manual

750
WEIGHT INDICATOR
With Body Mass Index Features
Owner’s Manual
CARDINAL SCALE MFG. CO.
8555-M483-O1 Rev A
PO Box 151 x Webb Cit
y
, MO 64870
11/11
Ph: 417-673-4631 x Fax: 417-673-5001
Printed in USA
www.detectoscale.com
8555-M483-O1 Rev A x 750 Owner’s
1
Technical Support: Ph: 866-254-8261 x techsupport@cardet.com

Detecto 750 Specifications

General

Readability	0.2 lbs
Display	LCD
Power	AC adapter or battery
Connectivity	RS232
Functions	BMI

Summary

FCC Compliance and Disposal

FCC Compliance Statement

Information regarding radio frequency compliance and potential interference.

Proper Disposal Guidelines

Instructions for environmentally responsible disposal of the electronic device.

Introduction and Specifications

Introduction

Welcome message and overview of the owner's manual for the 750 Weight Indicator.

Specifications

Technical details of the 750 Weight Indicator, including operating ranges and features.

Site Preparation Requirements

Environmental Considerations

Guidelines for optimal operating environment including temperature, sunlight, and air circulation.

Electrical Power Setup

Requirements for AC power adapter, outlet, grounding, and wiring compliance.

Installation Procedures

Unpacking and Mounting

Steps for removing the indicator from packaging and attaching it to a mounting bracket.

Connections and Interfaces

Details on load cell, serial I/O ports, and serial interface specifications for data transfer.

Power and Battery Management

Instructions for installing batteries, using the AC adapter, and battery charging.

Keypad Functions

Basic Key Operations

Explanation of the ON/OFF, ZERO, and UNITS keys for primary functions.

Advanced Keypad Features

Using LOCK/RELEASE, BMI/ENTER, Arrow keys, and Down Arrow/Print for advanced operations.

Operation Modes

Standard Weighing and BMI

Procedures for basic weighing, zeroing, metric conversion, and calculating Body Mass Index.

Data Recall and Storage

How to review previous weights and store serial ID information.

Setup and Calibration

Entering Setup and Calibration Mode

Procedure to access and initiate the setup and calibration menus.

General Configuration Settings

Setting units, motion range, decimal points, capacity, and digital filter levels.

Calibration Procedures

Steps for calibration involving loading weights, unloading, and setting gravity constants.

Operational Mode Settings

Configuring hold, auto-lock, zero tracking, and power-up zero functions.

System and Power Settings

Adjusting baud rate, battery type selection, sleep mode, and auto-shutoff.

Setup Review and Event Counter

Setup Review Function

How to review and change operational parameters without re-entering setup mode.

Event Counter Functionality

Checking calibration and configuration counters for security tracking.

Data Communication

Weight On Demand Formats

Computer requests for weight, BMI, and height data transmission.

Serial Print Commands

Commands to control data printing and retrieval via the serial port.

Troubleshooting and Service

Error and Status Displays

Understanding error codes and status indicators on the display.

Before Calling for Service

Common problems and their basic troubleshooting solutions.

Parts Identification

Component Identification

Diagrams and part numbers for indicator components and optional accessories.

Appendix A: Mounting Brackets

Indicator Mounting Bracket Assemblies

Illustrations of various mounting bracket options for the indicator.

Statement of Limited Warranty

Warranty Terms and Conditions

Details of the product warranty, exclusions, and limitations for the user.