OPERATION, CONT.
Weight Recall
Pressing the _ or ` keys during normal operation will enter a weight recall option allowing the
last 10 weights recorded to be reviewed. The weight is recorded each time the weight is
locked. The ZERO key can be used to clear the recorded values. Use the a or b keys to
scroll through the 10 records. Press any other key to return the indicator to normal operation.
NOTE! While reviewing the recorded weights, the display will alternate between the
transaction number and the weight. In addition, the 10 recorded weights can only be viewed.
They can not be printed.
Serial ID Storage
The 750 has been equipped with Serial ID storage for 200 records. Each ID stores the ID
index, Weight, Height, BMI and Unit of measure. When the BMI/ENTER key is pressed, the
indicator will assign the current values to a new ID and store the ID in memory. Next, the
indicator will print the ticket in the mode selected during setup and calibration.
Once the first print is finished, the indicator will allow more tickets to be printed, however it will
not store the values again until the weight goes below 1/10 of the scale capacity. This
prevents ID overlap until the next person steps on the scale.
NOTE! Serial ID storage can only be printed, not viewed through the display.
8555-M483-O1 Rev A x 750 Owner’s
12
To Next Page
Loading...
Need help?
General
